CUE REPAIR:
* CUE TIP REPLACEMENT * |
||
LePro, Elk Master, Triangle |
$15
|
|
Blue Diamond, Chandivert (8 Kinds) | $15 | |
Screw-On and Untested | $10 | |
Water Buffalo, Sumo | $20 | |
Molavia, Sniper, Talisman, Hercules | $30 | |
Everest, InStroke, CK, Dynamite | $30 | |
TAD, Red Pad Layered, Killer | $30 | |
Moori, Kamui | call for pricing | |
Hard Bungi, White Diamond, Canvas Phenolic | $30 | |
Regulard Tip Maintenance (i.e. Remove Mushroom, reshape, clean) | $5 | |
* FERRULE REPLACEMENT * |
||
Ferrule and Tip (not Threaded) | $25 | |
Ferrule and Tip (Threaded) | $35 | |
Ferrule (Threaded, Chalk-Resistant) | $45 | |
Super Clean ($10 off) | $45 | |
Tenon Replacement | $25 | |
Ivory Ferrule | $50 to $125 | |
Protection Pad | Extra $5 | |
* SHAFT AND BUTT REPAIR * |
||
C-10 Sand – Light Surface Sanding | $10 | |
C-10 Alchohol – Alchohol surface clean only. No size change! | $10 | |
C-15 Special – Size change of .003-.005. Removes most dents and chalk buildup | $15 | |
C-20 Super – Size change of .002-.004. Removes small dents and chalk buildup | $20 | |
C-25 Predator or Meucci Shaft | $25 | |
C-25 Super Glide – slightly smoother than Special or super | $25 | |
C-30 Predator or Meucci Shaft – Shaft wood and ferrule the same size! | $30 | |
C-40 Ultimate – steam clean full shaft. Little to no size change in shaft. | $40 | |
C-50 Ultimate and Perfect Shaft – steam clean and additional treatment to renew shaft | $50 | |
Serious Dent Removal – requires filling, etc.. | $10 to $30 | |
Shaft Size Change – 1st 1/4mm removed (+$5 for each additional 1/4mm removal) |
$35 | |
Taper Change (Must be present during process) | $20 to $40 | |
Shaft Collar | $35 to $60 | |
Brass Screw Insert | $60 | |
New Irish Linen Wrap | $45 | |
Wrap Cleaning | $20 | |
Clean and Polish Butt | $20 | |
Exotic Leather and Cork Wraps | $100 to $400 | |
Joint Collars | $35 to $60 | |
Bent Screw Repair | $20 to $30 | |
Weight Inspection (Minimum Charge) | $10 | |
Weight Change (Includes Inspection) | $10 to $40 | |
New Bumper | $10 to $50 | |
New Butt Cap | $40 -$60 | |
* ADDITIONAL PRODUCTS & SERVICES * |
||
Shaft Cleaning Kit | $15 | |
Used Shaft | $60 | |
New Shaft | $125 to $350 | |
Schon Shafts | $150 | |
Schon Joint Protector | $15 | |
Jump Handles, Jump Cues | $50 to 250 | |
Whole Cue Restoration | $150 and up | |